51 / 71
Fig. 114
18
By tightening four M5x20 Hex socket head bolts [1],
fasten Oil case [2] to Crankcase.
Fig. 115
19
Temporarily tighten Flange nut M10 [1], then screw
1R372 into the spark plug hole by hand, and then turn
Flywheel [2] until Piston stops.
Note
Remove any grease from the tapered portion of Crankshaft
with parts cleaner.
Fig. 116
20
Install Flywheel [1] onto Crankshaft, and then fasten
with Flange nut M10.
Tips
Use a torque wrench and Box wrench 14.
Tightening torque: 30-35N
･
m
Fig. 117
21
Fasten Pulley [1] to Crankshaft.
Tips
Use a torque wrench and Box wrench 15.
Tightening torque: 9-11N
･
m
[1]
[1]
1R372
[1]
[2]
[2]
[1]
