6 / 71
4
REPAIR WORK
4-1
Before starting repair work
4-1-1
Draining fuel tank, removing Pipes and Nozzle
1
Remove Fuel tank cap assembly, and then
drain Fuel tank.
Tips
Drain Carburetor as much as possible by pushing
Primer pump repeatedly.
Drain the oil when the machine is disassembled down
to Engine block. (Refer to Fig. 60.)
Fig. 3
2
Remove Intermediate pipe (Long pipe or Short pipe)
from Swivel pipe complete [1].
Fig. 4
3
Remove M5x30 Thumb screw [2] fastening Control
lever ass’y [1].
Fig. 5
4
Loosen Hose clamp 100 [1] to remove Cable holder [2]
and Flexible pipe [3]. Control lever ass’y can now be
removed.
[3]
[1]
[2]
[2]
[1]
[1]
