19 / 71
4-4
Control lever
4-4-1
Disassembling Control lever (for Model EB5300TH)
1
According to 4-1-1, remove M5x30 Thumb screw.
Fig. 41
2
Remove five 4x18 Tapping screws [1] to remove Lever
case R [2].
Fig. 42
3
Remove Throttle lever A [1] and Compression spring 4
[2] from Lever case L [3], and then disconnect the
barrel nipple of Control cable from Throttle lever A
[1].
Fig. 43
4
Release the corrugated tube, and remove Leaf spring A
[1]/ B [2] with long-nose pliers.
Tips
Remove Flag receptacles while releasing lock with a
slotted screwdriver or the like.
Fig. 44
5
Remove M4x20 Hex socket head bolt [1] to remove
Throttle link [2] and Throttle lever B [3]. In this step,
Flat washer 12 [4] is also removed.
[1]
[2]
[3]
[4]
[1]
[2]
[1]
[2]
[3]
[1]
[2]
