28 / 71
4-5
Engine section
4-5-1
Disassembling Engine
The following parts can be disassembled from Engine section without removing Blower section: Cam gear, Muffler, Air
cleaner plate, Carburetor, Insulator, Ignition coil. The following procedure is that the blower section is removed.
1
According to Fig. 13 and Fig. 14, remove Recoil starter and Engine cover complete.
Fig. 60
2
Remove M8x12 Hex bolt (drain bolt) [1] to drain Oil
case.
Note
Be careful not to lose Gasket (washer) [2].
Fig. 61
3
Remove three M6x20 Hex socket head bolts [1] to
remove Muffler [2] and Muffler gasket [3].
Note
Use a ratchet wrench, a bit adapter and 1R016-A to
loosen the bolt because it is a bolt with high strength
thread locking patch.
Fig. 62
4
Remove Exhaust port spacer [1] from Cylinder.
[1]
[2]
[3]
[1]
1R016-A
[1]
[2]
