6-4-2
For EBH252L and EBH253L
6-4-2-1
Disassembling
Fig. 6-4-2-1-1
Blade
side
Loop handle 24
Handle clamp 24
Shaft pipe complete
[1] Remove four M5x30 Pan
head screw, then
disassemble Loop handle.
Fig. 6-4-2-1-2
[2] Loosen four 4x18 Tapping screws, then remove Lever
case R.
Lever case R
Note:
Do not loosen Hex
socket head bolts.
Fig. 6-4-2-1-3
[3] Remove Control lever assembly as shown below.
Control cable
Lock lever
Torsion spring 7
Torsion spring 11
Throttle
lever
Lever case L
[4] Remove the cable
nipple from Throttle
lever.
(1)
(2)
Fig. 6-4-2-1-4
Switch lever
Switch cover
Leaf spring
[5] Loosen PT3x16 Tapping screw,
then remove Switch cover.
Lever case L
13 / 40