15
Observe the applicable accident prevention regulations!
STARTING
Move at least 3 m away from the place of refuelling. Place the Petrol Brushcutter on a clean piece of ground taking care that the cutting tool
does not come into contact with the ground or any other objects.
A: Cold start
1) Set this machine on a flat space.
CORRECT HANDLING OF MACHINE
POINTS IN OPERATION AND HOW TO STOP
2) Set the I-O switch (1) to OPERATION.
3) Choke lever
Close the choke lever.
Choke opening:
– Full closing in cold or when the engine is cold.
– Full or half opening in restart just after stop of operation.
CLOSE
Attachment of shoulder strap
– Adjust the strap length so that the cutter blade will be
kept parallel with the ground.
For EBH341U, EBH341UE
NOTE: Be careful not to trap clothing, etc., in the buckle.
Detachment
For EBH341L, EBH341LE
– In an emergency, push the notches (1) at both sides, and you can detach the
machine from you.
Be extremely careful to maintain control of the machine at this time. Do not allow
the machine to be deflected toward you or anyone in the work vicinity.
WARNING: Failure to maintain complete control of the machine at all could result in
serious bodily injury or DEATH.
Buckle
(2)
Hanger
(1)
EBH341U/EBH341UE
For EBH341U, EBH341UE
– In an emergency, push the notches (2) at both sides, and
you can detach the machine from you.
Be extremely careful to maintain control of the machine
at this time. Do not allow the machine to be deflected
toward you or anyone in the work vicinity.
WARNING: Failure to maintain complete control of the
machine at all could result in serious bodily
injury or DEATH.
EBH341U,
EBH341UE
EBH341L,
EBH341LE
OPERATION
STOP
(1)
Low speed
High speed
(1)
OPERATION
Lock-off lever
High speed
Low speed
Throttle lever
STOP
Lock-off lever
Throttle lever
Summary of Contents for EBH341U
Page 95: ......
Page 96: ...Makita Corporation Anjo Aichi Japan 884891B360...