15
CORRECT HANDLING OF MACHINE
Attachment of shoulder strap
Adjust the strap length so that the cutter blade will be
–
kept parallel with the ground.
For EM2650UH
NOTE: Be careful not to trap clothing, etc., in the buckle.
Observe the applicable accident prevention regulations!
STARTING
Move at least 3 m away from the place of refueling. Place the unit on the ground taking care that the cutting tool does not come into contact with
the ground or any other objects.
A: Cold start
1) Set this machine on a flat space.
2) Set the I-O switch (1) to OPERATION.
OPERATION
Lock-off lever
High speed
Low speed
Throttle lever
Hanger
Hanger
POINTS IN OPERATION AND HOW TO STOP
Detachment
For EM2650LH (Optional accessory)
In an emergency, push the notches (1) at both sides, and you can detach the
–
machine from you.
Be extremely careful to maintain control of the machine at this time. Do not
allow the machine to be deflected toward you or anyone in the work vicinity.
WARNING: Failure to maintain complete control of the machine at all could
result in serious bodily injury or DEATH.
For EM2650UH
In case of emergency, remove the emergency detachment lever (2) by pulling
–
strongly with a finger. The machine sill detach from body.
Be extremely careful to maintain control of the machine at this time. Do not
allow the machine to be deflected toward you or anyone in the work vicinity.
WARNING: Failure to maintain complete control of the machine at all could
result in serious bodily injury or DEATH.
EM2650LH
EM2650UH
STOP
(1)
STOP
OPERATION
Lock-off lever
High speed
Low speed
Throttle lever
(1)
(1)
Buckle
(2)
EM2650UH
Summary of Contents for EM2650LH
Page 83: ...83...
