Makita G1700I, Instructions For Use Manual

ENGLISH

FRANÇAISE

ESPAÑOL

FEDERAL EMISSIONS COMPONENT DEFECT WARRANTY

EMISSIONS COMPONENT DEFECT WARRANTY COVERAGE – 

This emission warranty is applicable in all States, except the

State of California.

Makita U.S.A. Inc., La Mirada, California, (herein “MAKITA”) warrant(s) to the initial retail purchaser and each subsequent owner, that this
Nonroad engine (herein “engine”) has been designed, built, and equipped to conform at the time of initial sale to all applicable regulations of
the U.S. Environmental Protection Agency (EPA), and that the engine is free of defects in materials and workmanship which would cause this
engine to fail to conform with EPA regulations during its warranty period.

For the components listed under PARTS COVERED, the Makita Factory Service Center or Service Center authorized by MAKITA will, at no
cost to you, make the necessary diagnosis, repair, or replacement necessary to ensure that the engine complies with applicable U.S. EPA
regulations.

EMISSISON COMPONENT DEFECT WARRANTY PERIOD

The warranty period for this engine begins on the date of sale to the
initial purchaser and continues for a period of 2 years.

PARTS COVERED 

Listed below are the parts covered by the Emission Components
Defect Warranty. Some of the parts listed below may require
scheduled maintenance and are warranted up to the first scheduled
replacement point for that part.

(1) Fuel Metering System  

(i) Carburetor and internal parts (and/or pressure regulator or

fuel injection system).

(ii) Air/fuel ratio feedback and control system, if applicable.

(iii) Cold start enrichment system, if applicable.

(iv) Regulator assy (gaseous fuel, if applicable)  

(2) Air Induction System

(i) Intake manifold, if applicable

(ii) Air filter.

(3) Ignition System

(i) Spark plugs.  

(ii) Magneto or electronic ignition system.   

(iii) Spark advance/retard system, if applicable.

(4) Exhaust manifold, if applicable

(5) Miscellaneous Items Used in Above Systems

(i) Electronic controls, if applicable

(ii) Hoses, belts, connectors, and assemblies.

(iii) Filter lock assy (gaseous fuel, if applicable)

OBTAINING WARRANTY SERVICE

To obtain warranty service, take your engine to the nearest Makita
Factory Service Center or Service Center authorized by MAKITA .
Bring your sales receipts indicating date of purchase for this engine.
The  Makita Factory Service Center or Service Center authorized by
MAKITA will perform the necessary repairs or adjustments within a
reasonable amount of time and furnish you with a copy of the repair
order. All parts and accessories replaced under this warranty become
the property of MAKITA.

WHAT IS NOT COVERED

*Conditions resulting from tampering, misuse, improper adjustment

(unless they were made by the Makita Factory Service Center or
Service Center authorized by MAKITA during a warranty repair),
alteration, accident, failure to use the recommended fuel and oil, or
not performing required maintenance services. 

*The replacement parts used for required maintenance services.

*Consequential damages such as loss of time, inconvenience, loss

of use of the engine or equipment, etc.

*Diagnosis and inspection charges that do not result in warranty-

eligible service being performed.

*Any non-authorized replacement part, or malfunction of authorized

parts due to use of non-authorized parts.

OWNER’S WARRANTY RESPONSIBILITIES 

As the engine owner, you are responsible for the performance of the
required maintenance listed in your owner’s manual. MAKITA
recommends that you retain all receipts covering maintenance on
your engine, but MAKITA cannot deny warranty solely for the lack of
receipts or for your failure to ensure the performance of all
scheduled maintenance.

As the engine owner, you should however be aware that MAKITA
may deny  warranty coverage if your engine or a part has failed due
to abuse, neglect, improper maintenance or unapproved
modifications.

You are responsible for presenting your engine to the nearest
Makita Factory Service Center or Service Center authorized by
MAKITA when a problem exists.

If you have any questions regarding your warranty rights and
responsibilities, you should contact the Makita Warranty Department
at 1-800-4-MAKITA for the information.

THINGS YOU SHOULD KNOW ABOUT THE EMISSION
CONTROL SYSTEM WARRANTY MAINTENANCE AND
REPAIRS 

You are responsible for the proper maintenance of the engine. You
should keep all receipts and maintenance records covering the
performance of regular maintenance in the event questions arise.
These receipts and maintenance records should be transferred to
each subsequent owner of the engine. MAKITA reserves the right to
deny warranty coverage if the engine has not been properly
maintained. Warranty claims will not be denied, however, solely
because of the lack of required maintenance or failure to keep
maintenance records.

MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION
CONTROL DEVICES AND SYSTEMS MAY BE PERFORMED BY
ANY REPAIR ESTABLISHMENT OR INDIVIDUAL; 
HOWEVER, WARRANTY REPAIRS MUST BE PERFORMED BY
THE MAKITA FACTORY SERVICE CENTER OR SERVICE
CENTER AUTHORIZED BY MAKITA . THE USE OF PARTS THAT
ARE NOT EQUIVALENT IN PERFORMANCE AND DURABILITY
TO AUTHORIZED PARTS MAY IMPAIR THE EFFECTIVENESS
OF THE EMISSION CONTROL SYSTEM AND MAY HAVE A
BEARING ON THE OUTCOME OF A WARRANTY CLAIM.

If other than the parts authorized by MAKITA are used for
maintenance replacements or for the repair of components affecting
emission control, you should assure yourself that such parts are
warranted by their manufacturer to be equivalent to the parts
authorized by MAKITA in their performance and durability.

G1700I(CSA)̲GU1979  05.1.26  10:53 AM  ページ01