Makita GA041GZ02, Instruction Manual

25

ENGLISH

COMBINATION OF APPLICATIONS AND 
ACCESSORIES

Optional accessory

CAUTION:

Using the tool with incorrect guards can cause risks as follows.

• 

When using a cut-off wheel guard for facial grinding, the wheel guard may interfere with the work

-

piece causing poor control.

• 

When using a grinding wheel guard for cutting-off operations with bonded abrasive wheels and dia

-

mond wheels, there is an increased risk of exposure to rotating wheels, emitted sparks and particles, 
as well as exposure to wheel fragments in the event of wheel burst.

• 

When using a cut-off wheel guard or grinding wheel guard for facial operations with cup-type dia

-

mond wheels, the wheel guard may interfere with the workpiece causing poor control.

• 

When using a cut-off wheel guard or grinding wheel guard with a wheel-type wire brush with a thick

-

ness greater than the maximum thickness as specified in "SPECIFICATIONS", the wires may catch on 

the guard leading to breaking of wires.

2

6

7

4

5

5

2

2

8

10

9

3

1

Fig.40

-

Application

100 mm (4″) model

115 mm (4-1/2″) model

125 mm (5″) model

1

-

Side grip

2

-

Wheel Guard (for grinding wheel)

3

Grinding / Sanding

Depressed center wheel / Flap disc

4

-

Wheel Guard (for cut-off wheel) *1

5

Cutting-off

Abrasive cut-off wheel / Diamond wheel

6

Wire brushing

-

Wire wheel brush

7

Wire brushing

Wire cup brush

8

-

Clip-on cutting wheel guard attachment *2

9

-

Dust collecting wheel guard for cutting-off

10

Cutting-off

Diamond wheel

NOTE:

 *1 In some European countries, when using a diamond wheel, the ordinary guard can be used instead of the 

special guard covering the both side of the wheel. Follow the regulations in your country.

NOTE:

 *2 Clip-on cutting wheel guard attachment is not available in some countries such as Korea, Taiwan, and 

mainland China. For more details, refer to the instruction of the clip-on cutting wheel guard attachment.