P 6/ 14
R
epair
ASSEMBLING
(3) Assemble Spacer, Armature section and Gear housing to Motor housing as drawn in
Fig. 6
.
Fig. 6
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Armature, Spiral bevel gear [small one] (cont.)
1. Set Switch knob to “Lock ON” position so that Switch plate is pushed toward Spacer.
Then, mount Spacer while fitting its groove to Switch plate.
And then, return Switch knob to “OFF” position.
2. Assemble Armature section to Motor housing
while fitting the wings of Brake shoe complete
to the grooves of Spacer.
3. Face the notch to the same side as Name plate
by twisting Gear housing cover.
4. Assemble Gear housing while facing Spindle to the same side
as the notch and Name plate.
Groove of Spacer
Spacer
Wing of
Brake shoe complete
Wing of
Brake shoe complete
Switch plate Switch knob
groove
Notch on
Gear housing cover
Notch on
Gear housing cover
Gear housing cover
Spacer
Name plate
Name plate
Gear housing
Spindle
