Makita GA4041C, Technical Information

P 7/ 14 

R

epair

DISASSEMBLING

Note

: The gear and the ball bearings can be replaced without disassembling the motor section.

(1) Remove Ball bearing 696ZZ, Retaining ring S-9, Flat washer 10 and C-type plate from Spindle as drawn in 

Fig. 7

.

Fig. 7

[3] DISASSEMBLY/ASSEMBLY

[3] -3. Spiral bevel gear [large one], Ball bearings 696ZZ/ 6201DDW

1R258

1. Remove four M4x16 Hex socket head bolts, then separate Bearing box section from Gear housing.

Bearing box 

section

M4x16 Hex socket head bolt

1R269

2. Remove Ball bearing 696ZZ

    with 1R269.

3. Remove Retaining ring S-9

    with 1R291.

4. Remove Flat washer 10. 

    Then, remove C-type plate.

5. Receive Bearing box with 1R258

    and remove Spindle by pressing it

    with Arbor press.

6. Joint sleeve can be removed.

Ball bearing

696ZZ

Retaining 

ring S-9

Flat washer 10

C-type plate.

7. Using 1R291, remove Retaining

    ring R-26 from the inside of

    Lead flange.

    Then, separate Lead flange

    from Spindle .

Lead flange

Spindle

Retaining 

ring R-26

Joint sleeve

Arbor press

1R258

1R258

1R258

Spindle

1R291