6
WORK REST
The work rests are independently adjustable to
compensate for wheel wear. Before grinding, make
certain the work rests are adjusted properly. Generally the
object being ground is done slightly above center of the
grinding wheel.
Adjust the distance between the wheel and work rest to
maintain 1.6 mm. or less separation as diameter of the
wheel decreases with use.
With a permanently mounted work light that automatically
lights the work area for safer, more accurate grinding and
sharpening.
COOLANT TRAY
When grinding, metal objects become heated quickly. It is
important to keep moving the object back and forth across
the grinding wheel and to cool the object frequently using
the grinder’s coolant tray.
GB602/GB801 (Fig. 3)
1. Adjustable knob
2. Safety eye shield
3. Work rest (left)
4. Adjustment bolts
5. Coolant tray
6. Auto-ON (work light)
7. Spark deflector (left)
8. Spark deflector (right)
9. Lamp cover
10. Safety eye shield with magnifying glass
11. Work rest (right)
12. Power switch
GB602W (Fig. 4)
1. Adjustable knob
2. Safety eye shield
3. Saw blade sharpening kit
4. Adjustment bolts
5. Coolant tray
6. Auto-ON (work light)
7. Spark deflector (left)
8. Spark deflector (right)
9. Lamp cover
10. Safety eye shield with magnifying glass
11. Work rest (right)
12. Power switch
MOUNTING SAFETY EYE SHIELDS
See Fig. 5-6.
1. Safety eye shield
2. Eye shield
mounting arm
3. Adjustable knob
4. Washer
5. Hex bolt
1. Eye shield
mounting arm
2. Hex bolt
3. Adjustable knob
4. Safety eye shield
Mount the left and right eye shield-mounting arm To the
inside of the wheel guards using the clamp Brackets, hex
bolts (M6 X 30 mm), and washers (6 mm).
1
2
3
6
7
8
9
10
11
4
5
12
1
2
3
6
7
8
9
10
11
4
5
12
ASSEMBLY
1
2
3
4
5
Fig. 5
1
2
3
4
Fig. 6
Summary of Contents for GB602
Page 83: ...83 ...
