4
ENGLISH (Original instructions)
Explanation of general view
2-1. Button
3-1. Metering valve
3-2. Cap
7-1. Jet nozzle
10-1. Screws
11-1. Hook
15-1. Pusher button
17-1. Trigger
18-1. Screws
20-1. Filter cover
20-2. Filter
SPECIFICATIONS
Model GN900
Nail length X Shank diameter
Nail L :50 mm - 90 mm d : 2.9 mm - 3.3 mm
Nail capacity
40 nails (1strip)
Nail collation angle (degree)
34
Figure of nail head
Clipped
Dimensions (L X W X H)
321 mm X 108 mm X 368 mm
Net weight
3.3 kg
Rated voltage
D.C. 7.2 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END107-7
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Container under pressure, keep away
from temperatures over 50°C (for ex.
sun radiation) Keep container in a well
ventilated place.
･
Use only outside or well ventilated
rooms. Do not breathe gas.
･
Do not use near flames or sprays on
heated surfaces. In use, may form
flammable/explosive vapour-air mixture.
･
Do not damage, puncture or burn even
after use.
･
Wear
safety
glasses.
･
Keep fingers away from trigger when
not driving fasteners to avoid accidental
firing.
･
Use only in ventilated area to avoid
nausea and unconsciousness. Never
use tool in combustible atmospheres.
The tool exhaust may ignite flammable
materials.
･
Do not use on scaffoldings, ladders.
･
Warning: hot surface!
Do not touch around this symbol.
Touching the surface may cause burns
or injuries.
･
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately and returned to an
environmentally compatible recycling
facility.
ENE059-1
Intended use
The tool is intended for the preliminary interior work
such as fixing floor joists or common rafters and framing
work in 2 “x 4” housing.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN792:
Sound pressure level (L
pA
) : 89 dB(A)
Sound power level (L
WA
) : 102 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
Cd
Ni-MH
Li-ion
Summary of Contents for GN900
