Shape for easy use
The length and shape suitable for tile tearing ,
putting Motor laterally.
Improved Dust-proof
Owing to applying a dust-proof
cap with lip, it is prevented that
dusts enter from the top end.
Light weight
MAKITA #HK0500:
3.1kgs (6.8 lbs)
Tough body
The strength is enough to bear if you
use it gouging like a bar.
Large Trigger switch
Your fingers will not be exhausted
even after a long time operation.
Large L-shape handle
Large and round Handle shape is easy
to grip.
With dial of variable/stepless speed
You can do finer chipping works, and
operate the dial, pulling Trigger.
Low Vibration
Whole plastic body
If Bit touches electric wires in the
wall, electric shock is rarely conveyed
to a worker because the whole outer
surface is covered by plastic.
Bit can be fixed at 12 levels
of degreed position.
The strength is enough to
bear if you use it gouging
like a bar.
One-touch sliding chuck
B y o n l y i n s e r t i n g B i t a n d s e a r c h i n g
grooves, you can install Bit.
Thick commutator
Effective thickness of Segment in
Commutator has been made to be as
twice big
as that of #HK1810. Also, it is
protected from radiant heat and dust
particles by
Barrel part easy to be gripped
Very comfortable to grip because of its
proper thickness and length ( 58x100mm,
2-1/4" x 3-15/16" )
