< 8> Grease
Change of grease
Change grease to fresh one when carbon brush is changed.
(1) Idle the machine for several minutes in order to warm up.
(2) Take off the handle and controller cover
by loosening 2 pcs.of hex socket hd.bolt M6x40
and 4 pcs.of hex socket hd.bolt M6x30.
And then, crank housing appears.
Hex socket hd.bolt M6x40
Hex socket hd.bolt M6x30
Handle
Crank Housing
Crank Cap
Controller cover
< Remarks >
The fresh grease to be applied has to
be limited to 30 g.
Over application can be cause of trouble.
(3) Take off crank cap.
(4) Gather the grease softened by warming up, into
the crank housing by facing the tool holder cap side
to upward.
(5) Wipe out the grease
in the crank housing
with cloth. And then, apply fresh MAKITA grease
No.00 by 30g.
P 9 / 14