P 13/ 17
R
epair
[3] ASSEMBLY/ DISASSEMBLY
[3] -5. Armature
(1) Separate Motor housing from Crank section. (Refer to
Figs. 16 and 17
.)
(2) Separate Gear housing complete from Crank section. (Refer to
Fig. 18
.)
(3) Remove Armature as drawn in
Fig. 27
.
Assemble Armature by reversing the disassembly procedure.
Note:
Make sure that Flat washer 15 is set in place. (Refer to
Fig. 17
.)
Fig. 27
2. Remove Ball bearing 6000DDW with 1R269.
1. Remove Armature from Gear housing complete
with 1R045 and 1R346.
1R045
1R346
Armature
Armature
Insulation
washer
Ball bearing
6000DDW
Gear housing
complete
1R269
DISASSEMBLING
ASSEMBLING
