P 14/ 17
R
epair
[3] ASSEMBLY/ DISASSEMBLY
[3] -6. Electrical parts in Handle section
(1) Disassemble Handle section. (Refer to
Fig. 3
.)
(2) Remove electrical parts as drawn in
Fig. 28
.
Fig. 28
1. Remove two 4x18 Tapping screws and
remove Handle cover.
DISASSEMBLING
Power supply cord
Switch lever
Lever stopper
4x18 Tapping
screw (2pcs.)
Terminal block
Switch
Handle cover
Sponge sheet
Rubber pin 4 (green)
2. Electrical parts (Switch, Power supply cord and Terminal block, etc.)
can be replaced.
Note:
Be careful not to lose Rubber pin 4 when disassembling Switch.
Pliers
3. Remove Lever stopper with pliers and also remove Switch lever.