P
8
/ 1
7
R
epair
[3] ASSEMBLY/ DISASSEMBLY
[3]-3. Active dynamic vibration absorber (only for HM1213C)
DISASSEMBLING
ASSEMBLING
Fig. 14
Fig. 15
Fig. 16
Fig. 18
Compression
spring 15
Spring guide
Absorber holder portion of
Crank housing complete
Phillips
screwdriver
Slotted screwdriver
Pipe holder
Push Spring guide
(inner part of the
Absorber).
Absorber holder
Spring guide tilts to be hooked
inside Absorber, and the end
of Absorber is removed from
Absorber holder portion of
Crank housing complete.
Disassemble Active dynamic vibration absorber as follows.
Disassemble Active dynamic vibration absorber as illustrated in
Figs. 12, 13 and 14
.
Assemble Active dynamic vibration absorber as illustrated in
Figs. 17 and 18
.
Disassemble active dynamic
vibration absorber by levering up
with two Slotted screwdrivers.
Active dynamic
vibration absorber
Pipe holder
Pipe holder
O ring 12
O ring 12
O ring 12
O ring 12
O ring 24
O ring 24
Compression spring 15
Compression spring 15
Spring guide
Pipe 22
Counter weight
Spring guide
Spring guide
Assemble Active dynamic vibration
absorber by pressing while maintaining
its position parallel to Crank housing.
Spring guide
Fig. 17
Spring guide
Spring guide
If Spring guide is hooked
in Absorber, push Spring
guide to pop it out from
Pipe holder.
Spring guide protrudes.
Turn and push Pipe holders
as illustrated above.
Pipe holders can be separated.
