Makita HP333D, Instruction Manual

6

ENGLISH

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specifications provided 

with this power tool.

 Failure to follow all instructions 

listed below may result in electric shock, fire and/or 

serious injury.

Save all warnings and instruc-
tions for future reference.

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

Cordless hammer driver drill safety 
warnings

1. 

Wear ear protectors when impact drilling.

Exposure to noise can cause hearing loss.

2. 

Use auxiliary handle(s), if supplied with the 
tool.

 Loss of control can cause personal injury.

3. 

Hold power tool by insulated gripping sur-
faces, when performing an operation where the 
cutting accessory may contact hidden wiring.

Cutting accessory contacting a "live" wire may 
make exposed metal parts of the power tool "live" 
and could give the operator an electric shock.

4. 

Hold power tool by insulated gripping sur-
faces, when performing an operation where 
the fastener may contact hidden wiring.

Fasteners contacting a "live" wire may make 
exposed metal parts of the power tool "live" and 
could give the operator an electric shock.

5. 

Always be sure you have a firm footing. Be 

sure no one is below when using the tool in 
high locations.

6. 

Hold the tool firmly.

7. 

Keep hands away from rotating parts.

8. 

Do not leave the tool running. Operate the tool 
only when hand-held.

9. 

Do not touch the bit or the workpiece immedi-
ately after operation; they may be extremely 
hot and could burn your skin.

10. 

Some material contains chemicals which may 
be toxic. Take caution to prevent dust inhala-
tion and skin contact. Follow material supplier 
safety data.

11. 

If the drill bit cannot be loosened even you 
open the jaws, use pliers to pull it out.

 In such a 

case, pulling out the drill bit by hand may result in 

injury by its sharp edge.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity 

with product (gained from repeated use) replace 
strict adherence to safety rules for the subject 
product. MISUSE or failure to follow the safety 
rules stated in this instruction manual may cause 
serious personal injury.

Important safety instructions for 
battery cartridge

1. 

Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery 
charger, (2) battery, and (3) product using 
battery.

2. 

Do not disassemble battery cartridge.

3. 

If operating time has become excessively 
shorter, stop operating immediately. It may 
result in a risk of overheating, possible burns 
and even an explosion.

4. 

If electrolyte gets into your eyes, rinse them 
out with clear water and seek medical atten-
tion right away. It may result in loss of your 
eyesight.

5. 

Do not short the battery cartridge:

(1) 

Do not touch the terminals with any con-
ductive material.

(2) 

Avoid storing battery cartridge in a con-
tainer with other metal objects such as 
nails, coins, etc.

(3) 

Do not expose battery cartridge to water 
or rain.

A battery short can cause a large current 

flow, overheating, possible burns and even a 

breakdown.

6. 

Do not store the tool and battery cartridge in 
locations where the temperature may reach or 
exceed 50 °C (122 °F).

7. 

Do not incinerate the battery cartridge even if 
it is severely damaged or is completely worn 

out. The battery cartridge can explode in a fire.

8. 

Be careful not to drop or strike battery.

9. 

Do not use a damaged battery.

10. 

The contained lithium-ion batteries are subject 
to the Dangerous Goods Legislation require-
ments. 

For commercial transports e.g. by third parties, 

forwarding agents, special requirement on pack-

aging and labeling must be observed.

For preparation of the item being shipped, consult

-

ing an expert for hazardous material is required. 

Please also observe possibly more detailed 

national regulations. 
Tape or mask off open contacts and pack up the 

battery in such a manner that it cannot move 

around in the packaging.

11. 

Follow your local regulations relating to dis-
posal of battery.

12. 

Use the batteries only with the products 

specified by Makita.

 Installing the batteries to 

non-compliant products may result in a fire, exces

-

sive heat, explosion, or leak of electrolyte.

SAVE THESE INSTRUCTIONS.

CAUTION:

Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that 

have been altered, may result in the battery bursting 

causing fires, personal injury and damage. It will 

also void the Makita warranty for the Makita tool and 
charger.