Makita HR2310T, Instruction Manual

12

Model HR2611FT

Work mode: hammer drilling into concrete
Vibration emission (a

h, HD

): 11.5 m/s

2

Uncertainty (K): 1.5 m/s

2

Work mode: chiseling function with side grip
Vibration emission (a

h, CHeq

): 8.5 m/s

2

Uncertainty (K): 1.5 m/s

2

Work mode: drilling into metal
Vibration emission (a

h, D

): 2.5 m/s

2

 or less

Uncertainty (K): 1.5 m/s

2

ENG901-1

• The declared vibration emission value has been mea-

sured in accordance with the standard test method and
may be used for comparing one tool with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the power

tool can differ from the declared emission value
depending on the ways in which the tool is used.

• Be sure to identify safety measures to protect the oper-

ator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).

ENH101-15

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible manufac-
turer declare that the following Makita machine(s):

Designation of Machine: Rotary Hammer
Model No./ Type: HR2300, HR2310T, HR2600, HR2601
are of series production and

Conforms to the following European Directives: 

2006/42/EC

And are manufactured in accordance with the following
standards or standardised documents: 

EN60745

The technical documentation is kept by our authorized
representative in Europe who is:

Makita International Europe Ltd.
Michigan Drive, Tongwell, 
Milton Keynes, Bucks MK15 8JD, England

13.7.2009

Tomoyasu Kato

Director

Makita Corporation 

3-11-8, Sumiyoshi-cho, 

Anjo, Aichi, 446-8502, JAPAN

ENH101-15

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible manufac-
turer declare that the following Makita machine(s):

Designation of Machine: Combination Hammer
Model No./ Type: HR2610, HR2610T, HR2611F,
HR2611FT
are of series production and

Conforms to the following European Directives: 

2006/42/EC

And are manufactured in accordance with the following
standards or standardised documents: 

EN60745

The technical documentation is kept by our authorized
representative in Europe who is:

Makita International Europe Ltd.
Michigan Drive, Tongwell, 
Milton Keynes, Bucks MK15 8JD, England

13.7.2009

Tomoyasu Kato

Director

Makita Corporation 

3-11-8, Sumiyoshi-cho, 

Anjo, Aichi, 446-8502, JAPAN