7
ENGLISH
(Original instructions)
Explanation of general view
1
Switch trigger
2
Lock button
3
Lamp
4
Reversing switch lever
5
Quick change chuck for SDS-
plus
6
Change cover line
7
Change cover
8
Spindle
9
Quick change drill chuck
10 Rotation with hammering
11 Rotation only
12 Action mode changing knob
13 Hammering only
14 Protrusions
15 Grooves
16 Bit shank
17 Bit grease
18 Bit
19 Chuck cover
20 Grip base
21 Depth gauge
22 Toothed side of hex hole mark-
ing on the grip base
23 Toothed side of the depth gauge
24 Dust cup
25
△
symbol
26
Attachment at the foot of dust
cup
27
Bellows
28
Attachment
29
Carved side
30
Cap
31
Groove
32
Inside periphery
33
Blow-out bulb
34
Chuck adapter
35
Keyless drill chuck
36
Sleeve
37
Ring
SPECIFICATIONS
• Due to our continuing programme of research and
development, the specifications herein are subject to
change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE042-1
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
GEB007-7
ROTARY HAMMER SAFETY WARNINGS
1.
Wear ear protectors.
Exposure to noise can cause
hearing loss.
2.
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord.
Cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
4.
Wear a hard hat (safety helmet), safety glasses
and/or face shield. Ordinary eye or sun glasses
are NOT safety glasses. It is also highly recom-
mended that you wear a dust mask and thickly
padded gloves.
5.
Be sure the bit is secured in place before opera-
tion.
6.
Under normal operation, the tool is designed to
produce vibration. The screws can come loose
easily, causing a breakdown or accident. Check
tightness of screws carefully before operation.
Model
HR2300 HR2310T
HR2600
HR2601
HR2610
HR2610T
HR2611F
HR2611FT
Capacities
Concrete
23 mm
26 mm
Core bit
68 mm
68 mm
68 mm
Diamond core bit
(dry type)
70 mm
80 mm
80 mm
Steel
13 mm
13 mm
13 mm
Wood
32 mm
32 mm
32 mm
No load speed (min
-1
)
0 - 1,200
Blows per minute
0 - 4,600
Overall length
356 mm
380 mm
361 mm
385 mm
361 mm
385 mm
Net weight
2.7 kg
2.9 kg
2.8 kg
2.9 kg
2.8 kg
2.9 kg
2.9 kg
3.0 kg
Safety class
/II
Summary of Contents for HR2310T
Page 2: ...2 1 2 3 4 5 6 7 8 1 2 3 B A 4 5 6 7 8 9 6 7 10 11 12 10 12 11 ...
Page 3: ...3 9 10 11 12 13 14 15 16 13 14 15 17 16 18 18 19 12 20 2 21 ...
Page 4: ...4 17 18 19 20 21 22 23 24 23 22 2 22 23 24 25 15 24 18 19 26 27 28 ...
Page 5: ...5 25 26 27 28 29 30 31 32 29 30 31 32 28 30 28 33 34 35 5 6 7 ...
