R
epair
<4> Removing crank section
A. Removing piston cylinder
Shift piston cylinder to tool holder side by
turning crank shaft as illustrated in Fig. 6.
Take off pin 6 with screwdriver from
piston cylinder.
Pin 6
Connecting rod
Crank shaft
Crank housing
complete
Piston cylinder
Tool holder side
Fig. 6
Inner housing
complete side
B. Removing connecting rod
Remove inner housing complete
from crank housing complete by
taking off pan head screw M4x50 (3 pcs.).
Pan head screw M4x50 (3 pcs.)
Connecting rod
Crank housing complete
Crank shaft
Inner housing complete
Crank shaft
Connecting rod
Crank housing complete
Inner housing
complete side
Tool holder side
Bring connecting rod to the inner housing
complete side by turning crank shaft as
illustrated in Fig. 6B.
Fig. 6A
Fig. 6B
Inner housing
complete side
Tool holder side
Hold the inner housing complete
side of connecting rod. And take
off connecting rod by lifting
its tool holder side as illustrated
in Fig.6C.
Fig. 6C
