P 3 / 20
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Chuck Section
R
epair
DISASSEMBLE
1R350 for stabilizing
the Machine
Tool holder cap
1. Disassemble Handle section
from the machine.
1. Chuck section can be disassembled in the order from Fig. 2 to Fig. 9.
Putting the machine on 1R350,
remove Tool holder cap with
Slotted head screwdriver.
Pan head
screw M5x20: 4 pcs.
2. Disconnect Lead unit
from Brush holder unit.
Ring spring 25
Remove Ring spring 25 from
Tool holder.
Remove Tool retainer, while
pressing down Spring guide.
Disassemble Spring guide
(2 pcs.) and Compression
spring 48 from Tool holder.
Remove Flat
washer 28, Chuck
cover, and Spacer
from Tool holder.
Remove Chuck
ring and Release
cover.
Remove Ring
spring 25 from
Tool holder.
Ring
spring 25
Flat washer 28
Flat
washer 28
Chuck
cover
Chuck ring
Chuck
ring
Spacer
Chuck Cover
Ring spring 25
(another one)
Spring
guide
Spring guide
Tool retainer: 2 pcs.
Release
cover
Compression
spring 48
Spring guide
Tool holder
Spring guide
Fig. 2
Fig. 3
Fig. 6
Fig. 7
Fig.8
Fig. 9
Fig. 5
Fig. 4
1R003
1R003
1R212
Handle section