P 1
1
/ 2
3
[3] DISASSEMBLY/ASSEMBLY
[3] -4. Active Dynamic Vibration Absorber (HR4510C and HR4511C only)
R
epair
ASSEMBLY
DISASSEMBLY
Spring guide
Spring guide
If Spring guide is
locked inside the
Absorber,
Push the locked
Spring guide to
protrude from Absorber.
Now Spring guide
protrudes.
Spring guide
Mount Active dynamic vibration absorber
while keeping its position parallel to
Crank housing.
Spring guide
Fig. 31
Fig. 32
Fig. 33
Fig. 34
1) Assemble Active dynamic vibration absorber. (Fig. 30)
2) Set Spring guide in place as illustrated in Fig. 31.
3) Mount Active dynamic vibration absorber on the both side of Crank housing complete. (Fig. 32)
4) Do the reverse step of disassembly in Fig. 27.
[3] -5. Crank Cap Section
1) Remove Crank cap section as illustrated in Fig. 27.
2) Disassemble Crank cap section as illustrated in Figs. 33 and 34.
Link plate
Crank cap
Crank cap
Link plate and Change lever
can be disassembled from
Crank cap.
M4x12 Pan head screw
(with threadlocker)
Crank lever
Torsion
spring 15
Pull off Torsion
spring 15 with
pliers.
Remove Link lever.
Link lever
Torsion spring 15
Link lever
Crank shaft
Crank lever
Link plate
While gripping Crank lever with water pump pliers, unscrew M4x12
Pan head screw using cordlress impact driver with philips bit.
phillips bit
