P
9
/ 2
3
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Barrel Complete
R
epair
DISASSEMBLY
ASSEMBLY
1) Remove Barrel complete from the machine as illustrated in
Figs. 13, 14 and 15
.
2) Remove Ring spring 50 and Oil seal 35 as illustrated in
Figs. 24 and 25
.
Ring spring 50
Oil seal 35
Oil seal 35
Lip portion
Barrel complete
Note
: Facing the lip portion of Oil seal 35 to Tool holder cap side,
fit Oil seal into Barrel complete.
1) Fit Oil seal 35 into Barrel complete. Refer to
Fig. 26
.
2) Secure Oil seal with Ring spring 50. Refer to
Fig. 24
.
With thin slotted screwdriver,
remove Ring spring 50 for securing
Oil seal 35 in Barrel complete.
Oil seal 35
Push out Oil seal 35 by striking with slotted
screwdriver.
Fig . 24
Fig. 25
Fig. 26
Tool holder
cap Side
