6
EN
The machine you are about to use will operate at it’s best if all
instructions are duly followed. Before turning on the machine, make
sure it is perfectly horizontal on a firm level surface.
Connect the high pressure hose
A
to
the gun
B
, and with the other side of the
hose to the intake fitting, fixing tightly
the fastening nut
C
(Fig. 1).
Connect the water supply hose
E
to
the infeed fitting
F
. It is recommended
to use a reinforced hose having an
inner diameter of at least 10 mm. The
water intake must be at a pressure of
1 bar minimum and have a max inlet
temperature of 60°C (Fig. 2).
Fill the fuel tank
G
, with fuel (diesel) (Fig. 3).
Fig. 2
Fig. 3
Machine installation
6.
Machine installation
6.
Fig. 1
