4
ENGLISH (Original instructions)
Explanation of general view
1-1. Pointer
1-2. Knob
2-1. Lock button or Lock-off button
2-2. Switch trigger
3-1. Planer blade
3-2. Rear base
3-3. Foot
4-1. Socket wrench
4-2. Bolt
5-1. Bolt
5-2. Drum
5-3. Planer blade
5-4. Drum cover
5-5. Adjusting plate
6-1. Inside edge of gauge plate
6-2. Blade edge
6-3. Planer blade
6-4. Adjusting plate
6-5. Screws
6-6. Heel
6-7. Back side of gauge base
6-8. Gauge plate
6-9. Gauge base
7-1. Socket wrench
7-2. Bolt
8-1. Pan head screw
8-2. Adjusting plate
8-3. Planer blade locating lugs
8-4. Gauge plate
8-5. Heel of adjusting plate
8-6. Set plate
8-7. Inside flank of gauge plate
8-8. Gauge base
8-9. Back side of gauge base
8-10. Mini planer blade
9-1. Mini planer blade
9-2. Groove
9-3. Set plate
9-4. Hex. flange head bolt
9-5. Drum cover
9-6. Drum
9-7. Adjusting plate
10-1. Dust bag
10-2. Nozzle
11-1. Fastener
13-1. Elbow
13-2. Nozzle
14-1. Start
14-2. End
16-1. Blade edge
16-2. Cutting line
17-1. Screw
17-2. Edge fence (Accessory)
22-1. Sharpening holder
23-1. Wing nut
23-2. Blade (A)
23-3. Blade (B)
23-4. Side (D)
23-5. Side (C)
25-1. Limit mark
26-1. Chip cover
26-2. Screwdriver
27-1. Nozzle
27-2. Screwdriver
28-1. Brush holder cap
28-2. Screwdriver
SPECIFICATIONS
Model KP0800
Planing width
82 mm
Planing depth
2.5 mm
Shiplapping depth
9 mm
No load speed (min
-1
) 17,000
Overall length
285 mm
Net weight
2.6 kg
Safety class
/II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE001-1
Intended use
The tool is intended for planing wood.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENG102-2
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 89 dB(A)
Sound power level (L
WA
) : 100 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG222-2
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : planing softwood
Vibration emission (a
h
) : 2.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
Summary of Contents for KP0800J
Page 53: ...53 ...
Page 54: ...54 ...
Page 55: ...55 ...
Page 56: ...56 Makita Corporation Anjo Aichi Japan www makita com 884915C982 ...
