P 24/ 35
R
epair
[4] ADJUSTMENT
[4]-5. Laser (for LS1216L only: Cont.)
Note
: 1) In the process (10) and (11), backlash of M4x6 Hex socket set screw A or B may be happened. Therefore, turn each
M4x6 Hex socket set screw clockwise carefully to prevent backlash.
2) Be sure to distinguish the role of M4x6 Hex socket set screw A and M4x6 Hex socket set screw B.
Refer to
Fig. 92
.
3) Repairing tool No. 1R315 has three different versions due to the production period. The latest version can be used.
When using the old versions to adjust LS1216L, be sure to cut the excess length as illustrated in
Fig. 92
.
Fig. 92
Fig. 93
M4x6 Hex socket set screw A
for adjusting the laser beam against Base
These portions of the old versions 1R315
are stuck on Pan head screw that is
secured Bearing box for LS1216L.
Therefore, they are not used for LS1216L
without cutting the excess length.
The latest version 1R315 is 35mm shorter in length
than the old versions. Only the latest version can be used
for LS1216L without cutting.
M4x6 Hex socket set screw B
for adjusting the laser beam
against Fence
Cut 35mm length
Cut 35mm length
