Makita M6600, Instruction Manual

5 ENGLISH

Mixer safety warnings

1. 

Hold the tool with both hands at the intended 

handles.

 Loss of control can cause personal 

injury.

2. 

Ensure sufficient ventilation when mixing flam

-

mable materials to avoid a hazardous atmo

-

sphere.

 Developing vapour may be inhaled or be 

ignited by the sparks the power tool produces.

3. 

Do not mix food.

 Power tools and their accesso-

ries are not designed for processing food.

4. 

Keep the cord away from the working area.

 The 

cord may be entangled by the mixer blade.

5. 

Ensure that the mixing container is placed in a 

firm and secure position.

 A container that is not 

properly secured may move unexpectedly.

6. 

Ensure that no liquid splashes against the 

housing of the power tool.

 Liquid that has pene

-

trated the power tool can cause damage and lead 

to electric shock.

7. 

Follow the instructions and warnings for the 

material to be mixed.

 Material to be mixed may 

be harmful.

8. 

If the power tool falls into the material to be 

mixed, unplug the tool immediately and have 

the power tool checked by a qualified repair 

person.

 Reaching into the bucket with the tool still 

plugged in can lead to electric shock.

9. 

Do not reach into the mixing container with 

your hands or insert any other objects into it 

while mixing.

 Contact with the mixer blade may 

lead to serious personal injury.

10. 

Start up and run down the tool in the mixing 

container only.

 The mixer blade may bend or spin 

in an uncontrolled manner.

11. 

Ensure that no liquid splashes against the 

housing of the power tool.

 Liquid that has pen

-

etrated the power tool can cause damage to the 

tool.

12. 

Use auxiliary handles, if supplied with the tool.

Loss of control may cause personal injury.

13. 

Hold the power tool by insulated gripping 

surfaces, when performing an operation where 

the cutting accessory may contact hidden wir-

ing or its own cord.

 Cutting accessory contacting 

a "live" wire may make exposed metal parts of the 

power tool "live" and could give the operator an 

electric shock.

14. 

Always be sure you have a firm footing. Be 

sure no one is below when using the tool in 

high locations.

15. 

Hold the tool firmly.

16. 

Keep hands away from rotating parts.

17. 

Do not leave the tool running. Operate the tool 

only when you are holding it.

18. 

Some materials contain chemicals which may 

be toxic. Take caution to prevent dust inhala

-

tion and skin contact. Follow safety warnings 

by supplier of the material.

19. 

When performing the mixing operation, place 

the mixing container on a flat and stable 

surface.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity 

with product (gained from repeated use) replace 

strict adherence to safety rules for the subject 

product. MISUSE or failure to follow the safety 

rules stated in this instruction manual may cause 

serious personal injury.

FUNCTIONAL 

DESCRIPTION

CAUTION:

Always be sure that the tool is 

switched off and unplugged before adjusting or 

checking function on the tool.

Switch action

CAUTION:

Before plugging in the tool, always 

check to see that the switch trigger actuates 

properly and returns to the "OFF" position when 

released.

for European countries

► 

Fig.1:

1.

 Switch trigger

To start the tool, simply pull the switch trigger. Release 

the switch trigger to stop.

for other than European countries

► 

Fig.2:

1.

 Lock button 

2.

 Switch trigger

To start the tool, simply pull the switch trigger. Release 

the switch trigger to stop.

For continuous operation, pull the switch trigger and 

then push in the lock button.

To stop the tool from the locked position, pull the switch 

trigger fully, then release it.

ASSEMBLY

CAUTION:

Always be sure that the tool is 

switched off and unplugged before carrying out 

any work on the tool.

Installing the shaft

1.

  Tighten the shaft into the shaft holder till the hex 

nut contacts with the shaft holder.

► 

Fig.3:

1.

 Hex nut 

2.

 Shaft 

3.

 Shaft holder

2.

  Hold the shaft holder with the wrench and tighten 

the hex nut with the other wrench in the direction of 

arrow.

► 

Fig.4:

1.

 Wrench 

2.

 Shaft holder 

3.

 Wrench