P 8/ 12
R
epair
(2) Assemble Change lever to Cam holder complete as drawn in
Fig. 10
.
(3) Assemble Cam holder compete to Armature by reversing the Disassembly procedure.
(Refer to the
left
illustration in
Fig. 7
.)
ASSEMBLING
Fig. 10
Groove for
fitting Plate 19
Plate 19
1. Assemble Plate 19 to Cam holder complete by fitting it
to the groove in Cam holder complete.
Steel ball 5
2. Apply a little amount of Makita grease
N No.2 to Change lever at the portion
designated with black triangle.
And mount Steel ball 5 to Change lever.
Projection
Projection
Groove
Change lever
Cam side of
Cam holder complete
Change lever
3. Assemble Change lever to Cam holder complete as drawn below.
Note
: Fit Projection of the lever to the groove of Cam holder complete
when assembling them.
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Cam Complete, Change Lever (cont.)
