6 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
PV001G
Maximum
capacities
Wool pad
180 mm
Wool bonnet
180 mm
Spindle thread European countries
M14
Countries other than
Europe (country specific)
15.88 mm (5/8") / M16 / M14
Rated speed (n) / No load speed (n
0
)
2,200 min
-1
Overall length (with battery cartridge BL4040)
531 mm
Rated voltage
D.C. 36 V - 40 V max
Net weight
3.0 - 4.4 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications and battery cartridge may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL4020 / BL4025* / BL4040* / BL4050F* / BL4080F
* : Recommended battery
Charger
DC40RA / DC40RB / DC40RC
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
Maintain a firm grip with both hands on the
power tool.
Ni-MH
Li-ion
Only for EU countries
Due to the presence of hazardous com
-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip
-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor
-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Intended use
The tool is intended for polishing.
Summary of Contents for PV001GZ
