Makita TD126D, Original Instructions Manual

7

OPTIONAL ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.

If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Screw bits
• Socket bits
• Plastic carrying case
• Makita genuine battery and charger
• Bit-piece
• Drill bits with 1/4"
• Drill chuck assembly
• Hook

NOTE: 

• Some items in the list may be included in the tool pack-

age as standard accessories. They may differ from
country to country.

ENG905-1

Noise

The typical A-weighted noise level determined according
to EN60745:

Model TD126D

Sound pressure level (L

pA

): 92 dB (A)

Sound power level (L

WA

): 103 dB (A)

Uncertainty (K): 3 dB (A)

Model TD127D

Sound pressure level (L

pA

): 93 dB (A)

Sound power level (L

WA

): 104 dB (A)

Uncertainty (K): 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined
according to EN60745:

Model TD126D

Work mode: impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a

h

): 9.5 m/s

2

Uncertainty (K): 2.0 m/s

2

Model TD127D

Work mode: impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a

h

): 8.5 m/s

2

Uncertainty (K): 2.0 m/s

2

ENG901-1

• The declared vibration emission value has been mea-

sured in accordance with the standard test method and
may be used for comparing one tool with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the power

tool can differ from the declared emission value
depending on the ways in which the tool is used.

• Be sure to identify safety measures to protect the oper-

ator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).

ENH101-16

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):

Designation of Machine: 
Cordless Impact Driver
Model No./ Type: TD126D, TD127D
are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following
standards or standardised documents:

EN60745

The technical documentation is kept by: 

Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England

28.11.2011

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, 446-8502, JAPAN