9 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
UB001C
Capacities
Air volume
0 - 17.6 m
3
/min
Air speed (average)
0 - 58.0 m/s
Air speed (max.)
0 - 70.0 m/s
Overall length (with end nozzle)
960 mm / 1,010 mm / 1,060 mm
Rated voltage
D.C. 36 V - 40 V max
Net weight
2.6 - 2.9 kg
Protection degree
IPX4
•
Due to our continuing program of research and development, the specifications herein are subject to change without notice.
•
Specifications may differ from country to country.
•
Weight according to EPTA-Procedure 01/2014
Applicable portable power pack
PDC1200 / PDC01
WARNING:
Only use the portable power
packs listed above.
Use of any other portable power
packs may cause injury and/or fire.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Take particular care and attention.
Read instruction manual.
Keep hands away from rotating parts.
Long hair may cause entanglement
accident.
Keep bystanders away.
Wear eye and ear protection.
Do not expose to moisture.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col
-
lected separately and returned to an envi
-
ronmentally compatible recycling facility.
Intended use
The machine is intended for blowing dust.
Noise
The typical A-weighted noise level determined accord
-
ing to EN50636-2-100:
Sound pressure level (L
pA
) : 83.4 dB(A)
Uncertainty (K) : 2.2 dB(A)
Sound power level (L
WA
) : 91.4 dB (A)
Uncertainty (K) : 2.5 dB(A)
NOTE:
The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE:
The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea
-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter
-
mined according to EN50636-2-100:
Work mode: operation without load
Vibration emission (a
h
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
Summary of Contents for UB001C
