background image

13 ENGLISH

TROUBLESHOOTING

Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the man

-

ual, do not attempt to dismantle the machine. Instead, ask Makita Authorized Service Centers, always using Makita 

replacement parts for repairs.

State of abnormality

Probable cause (malfunction)

Remedy

Motor does not run.

Battery cartridge is not installed.

Install the battery cartridge.

Battery problem (under voltage)

Recharge the battery. If recharging is not effective, 

replace battery.

The drive system does not work 

correctly.

Ask your local authorized service center for repair.

Motor stops running after a little use. Battery's charge level is low.

Recharge the battery. If recharging is not effective, 

replace battery.

Overheating.

Stop using the machine to allow it to cool down.

The machine does not reach the 

maximum speed.

Battery is installed improperly.

Install the battery cartridge as described in this 

manual.

Battery power is dropping.

Recharge the battery. If recharging is not effective, 

replace battery.

The drive system does not work 

correctly.

Ask your local authorized service center for repair.

Abnormal vibration: 

 stop the machine immediately!

The drive system does not work 

correctly.

Ask your local authorized service center for repair.

Motor cannot stop: 

 Remove the battery immediately!

Electric or electronic malfunction.

Remove the battery and ask your local authorized 

service center for repair.

OPTIONAL 

ACCESSORIES

CAUTION:

 

These accessories or attachments 

are recommended for use with your Makita prod-

uct specified in this manual.

 The use of any other 

accessories or attachments might present a risk of 

injury to persons. Only use accessory or attachment 

for its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service 

Center.

 

Nozzle

 

Garden nozzle

 

Dust bag

 

Long nozzle

 

Tapered nozzle

 

Flexible hose set

 

Flexible hose complete (for brush/wiper nozzle)

 

Brush nozzle

 

Wiper nozzle

 

Makita genuine battery and charger

NOTE:

 Some items in the list may be included in the 

product package as standard accessories. They may 

differ from country to country.

Summary of Contents for UB101D















Reviews: