5
ENGLISH (Original instructions)
Explanation of general view
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. Switch trigger B
2-2. Switch trigger A
3-1. Adjusting dial
4-1. Hook
4-2. Belt
7-1. Trimming direction
7-2. Hedge surface to be trimmed
7-3. Tilt the blades.
8-1. String
12-1. Press
12-2. Chip receiver
12-3. Nut
12-4. Shear blade
13-1. Nut
13-2. Branch catcher
14-1. Hooks
14-2. Fit the hooks into groove
14-3. Grooves
15-1. Press the hooks on both sides
15-2. Unlock the hooks
16-1. Blade cover
16-2. Screws
17-1. Under cover
17-2. Blade cover
18-1. Plate
19-1. Crank
20-1. Screws
20-2. Shear blade
21-1. Crank
22-1. Oval hole of shear blade
24-1. Oval hole of shear blade
24-2. Crank
25-1. Crank
26-1. Limit mark
27-1. Holder cap cover
27-2. Screwdriver
28-1. Brush holder cap
28-2. Screwdriver
SPECIFICATIONS
Model
BUH550 UH550D BUH650 UH650D
Blade length
550 mm
650 mm
Strokes per minute (min
-1
)
1,000 - 1,800
1,000 - 1,800
Overall length
1,070 mm
1,074 mm
1,150 mm
1,154 mm
Net weight
5.1 kg
5.2 kg
Rated voltage
D.C.36V
D.C.36V
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END013-2
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
・
Read instruction manual.
・
Do not expose to rain.
・
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE014-1
Intended use
The tool is intended for trimming hedges.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model BUH550,UH550D
Sound pressure level (L
pA
) : 85.1 dB(A)
Sound power level (L
WA
) : 93.1 dB(A)
Uncertainty (K) : 2.5 dB(A)
Model BUH650,UH650D
Sound pressure level (L
pA
) : 84.3 dB(A)
Sound power level (L
WA
) : 92.3 dB(A)
Uncertainty (K) : 2.5 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model BUH550,UH550D
Work mode : hedge trimming
Vibration emission (a
h
) : 2.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Cd
Ni-MH
Li-ion
Summary of Contents for UH550D
Page 4: ...4 1 2 27 011161 1 2 28 011162 29 011160 ...
Page 74: ...74 ...
Page 75: ...75 ...
Page 76: ...76 Makita Corporation Anjo Aichi Japan www makita com 884974C986 ...