R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Motor, Switch and Power supply cord (cont.)
P
5
/
7
ASSEMBLING
Fig. 17
Fig. 16
Pin portion of
Gear housing
Hinge portion of
Lever
Gear housing complete
A part of Ball bearing 6000ZZ
Take the disassembling step in reverse.
Note: Refer to Fig. 16.
1) When setting Armature ass’y and Gear housing complete in place, pass Lever through Field ass’y at the same time
while inserting the hinge portion of Lever into Housing L carefully because the hinge tends to remove.
Insert the pin portion of Gear housing complete into Housing L as well.
2) When Armature ass’y, Field ass’y, Gear housing and Lever are set in place, Ball bearing 6000ZZ on Fan side of
Armature has to be partly exposed from Gear housing as illustrated in Fig. 17.
Field ass’y
Armature ass’y
A part of Ball bearing 6000ZZ has to
be exposed from Gear housing complete.
