background image

2 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model:

XBU03

Capacities

Air volume

0 - 13.0 m

3

/min (0 - 459 cu.ft./min)

Air speed (average)

0 - 43.2 m/s (0 - 96 MPH)

Air speed (max.)

0 - 52.1 m/s (0 - 116 MPH)

Overall length (with front nozzle)

825 mm (32-1/2″)

Rated voltage

D.C. 18 V

Net weight

2.5 - 3.0 kg (5.4 - 6.7 lbs)

Due to our continuing program of research and development, the specifications herein are subject to change 

without notice.

Specifications may differ from country to country.

The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi

-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge, battery adapter and charger

Battery cartridge

BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B

Battery adapter

PDC01

Charger

DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF

Some of the battery cartridges, battery adapters and chargers listed above may not be available depending on 

your region of residence.

Before using battery adapter, read instruction and cautionary markings on the battery adapter.

WARNING:

 

Only use the battery cartridges, battery adapters and chargers listed above.

 Use of any 

other battery cartridges,battery adapters and chargers may cause injury and/or fire.

SAFETY WARNINGS
IMPORTANT SAFETY 

INSTRUCTIONS

When using an electrical appliance, basic precautions 

should always be followed, including the following:

READ ALL 

INSTRUCTIONS BEFORE 

USING THIS APPLIANCE.

WARNING - To reduce the 

risk of fire, electric shock, 

or injury:

1.

Do not leave appliance when battery fitted. 

Remove battery from appliance when not in 

use and before servicing.

2.

Do not expose to rain. Store indoors.

3.

Do not allow to be used as a toy. Close 

attention is necessary when used by or near

children.

4.

Use only as described in this manual. Use only

manufacturer's recommended attachments.

5.

Do not use with damaged battery. If appliance 

is not working as it should, has been dropped, 

damaged, left outdoors, or dropped into water, 

return it to a service center.

6.

Do not put any object into openings. Do not use 

with any opening blocked; keep free of dust, lint, 

hair, and anything that may reduce air flow.

7.

Keep hair, loose clothing, fingers, and all parts 

of body away from openings and moving parts.

8.

Use extra care when cleaning on stairs.

9.

Use only the charger supplied by the manufac-

turer to recharge.

SAVE THESE INSTRUCTIONS.

This appliance is intended for household use.

Cordless Blower Safety 

Instructions

Preparation

1.

Always wear substantial footwear and long 

trousers while operating the blower.

2.

Do not wear loose clothing or jewellery that 

can be drawn into the air inlet. Keep long hair

away from the air inlets.

Summary of Contents for XBU03Z











Reviews: