background image

5 ENGLISH

Tips for maintaining maximum 

battery life

1.

Charge the battery cartridge before completely

discharged. Always stop tool operation and 

charge the battery cartridge when you notice 

less tool power.

2.

Never recharge a fully charged battery car-

tridge. Overcharging shortens the battery 

service life.

3.

Charge the battery cartridge with room tem-

perature at 10 °C - 40 °C (50 °F - 104 °F). Let 

a hot battery cartridge cool down before 

charging it.

4.

Charge the battery cartridge if you do not use

it for a long period (more than six months). 

ASSEMBLY

CAUTION:

 

Always be sure that the machine is 

switched off and the battery cartridge is removed 

before carrying out any work on the machine.

Installing the front nozzle

1.

Loosen 2 screws with the hex wrench, and then

pull the screws all the way.

1

1

►  

1.

 Screw

2.

Make sure that the Makita logo on the front nozzle

is facing the direction shown in the figure, and then 

attach the front nozzle to the machine.

1

►  

1.

 Front nozzle

3.

Tighten the screws with the hex wrench.

1

1

►  

1.

 Screw

Installing the flat nozzle or 

extension nozzle

Optional accessory

1.

Attach the adapter pipe to the front nozzle, and

then turn it clockwise to lock it into place.

1

2

►  

1.

 Adapter pipe 

2.

 Front nozzle

Summary of Contents for XBU03Z











Reviews: