Makita XBU07, Instruction Manual

7 ENGLISH

Installing or removing the dust bag

Hook the claw of the dust bag to the hook of the main 

unit, then hook the front side of the handle of the dust 

bag to the main unit, and then pull up the rear side of 

the handle until handle snaps into place as shown in 

the figure.

3

1

2

Fig.4

►    

1.

 Claw 

2.

 Handle 

3.

 Dust bag

To remove the dust bag, perform the installation proce-

dure in reverse.

Installing or removing the wide 

nozzle

Optional accessory

Insert the wide nozzle with its protrusions facing up into 

the nozzle.

1

Fig.5

►    

1.

 Protrusion

Attaching the shoulder strap

CAUTION:

When you use the machine in com-

bination of the backpack-type power supply such 

as portable power pack, do not use the shoulder 

harness included in the machine package, but use 

the hanging band recommended by Makita.

If you put on the shoulder harness included in the 

machine package and the shoulder harness of the 

backpack-type power supply at the same time, 

removing the machine or backpack-type power supply 

is difficult in case of an emergency, and it may cause 

an accident or injury. For the recommended hanging 

band, ask Makita Authorized Service Centers.

CAUTION:

Be sure to attach the hooks of 

the shoulder strap to the machine securely.

 If the 

hooks are attached incompletely, they may come off 

and cause an injury.

CAUTION:

Be sure to use the shoulder strap 

dedicated to this machine.

 Using other shoulder 

strap may cause an injury.

Attach the hook of the shoulder strap to the machine as 

shown in the figure.

1

Fig.6

►    

1.

 Hook