Makita XCC01, Instruction Manual

6 ENGLISH

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required. 

Please also observe possibly more detailed 

national regulations. 

Tape or mask off open contacts and pack up the 

battery in such a manner that it cannot move 

around in the packaging.

11. 

When disposing the battery cartridge, remove 

it from the tool and dispose of it in a safe 

place. Follow your local regulations relating to 

disposal of battery.

12. 

Use the batteries only with the products 

specified by Makita.

 Installing the batteries to 

non-compliant products may result in a fire, exces

-

sive heat, explosion, or leak of electrolyte.

13. 

If the tool is not used for a long period of time, 

the battery must be removed from the tool.

14. 

During and after use, the battery cartridge may 

take on heat which can cause burns or low 

temperature burns. Pay attention to the han-

dling of hot battery cartridges.

15. 

Do not touch the terminal of the tool imme-

diately after use as it may get hot enough to 

cause burns.

16. 

Do not allow chips, dust, or soil stuck into the 

terminals, holes, and grooves of the battery 

cartridge.

 It may result in poor performance or 

breakdown of the tool or battery cartridge.

17. 

Unless the tool supports the use near 

high-voltage electrical power lines, do not use 

the battery cartridge near high-voltage electri-

cal power lines.

 It may result in a malfunction or 

breakdown of the tool or battery cartridge.

18. 

Keep the battery away from children.

SAVE THESE INSTRUCTIONS.

CAUTION:

Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that 

have been altered, may result in the battery bursting 

causing fires, personal injury and damage. It will 

also void the Makita warranty for the Makita tool and 

charger.

Tips for maintaining maximum 

battery life

1. 

Charge the battery cartridge before completely 

discharged. Always stop tool operation and 

charge the battery cartridge when you notice 

less tool power.

2. 

Never recharge a fully charged battery car-

tridge. Overcharging shortens the battery 

service life.

3. 

Charge the battery cartridge with room tem-

perature at 10 °C - 40 °C (50 °F - 104 °F). Let 

a hot battery cartridge cool down before 

charging it.

4. 

When not using the battery cartridge, remove 

it from the tool or the charger.

5. 

Charge the battery cartridge if you do not use 

it for a long period (more than six months). 

Important safety instructions for wireless unit

1. 

Do not disassemble or tamper with the wireless unit.

2. 

Keep the wireless unit away from young children. If acci-

dentally swallowed, seek medical attention immediately.

3. 

Use the wireless unit only with Makita tools.

4. 

Do not expose the wireless unit to rain or wet conditions.

5. 

Do not use the wireless unit in places where 

the temperature exceeds 50°C (122°F).

6. 

Do not operate the wireless unit in places 

where medical instruments, such as heart 

pace makers are nearby.

7. 

Do not operate the wireless unit in places where 

automated devices are nearby.

 If operated, auto-

mated devices may develop malfunction or error.

8. 

Do not operate the wireless unit in places under 

high temperature or places where static electric-

ity or electrical noise could be generated.

9. 

The wireless unit can produce electromagnetic 

fields (EMF) but they are not harmful to the user.

10. 

The wireless unit is an accurate instrument. Be 

careful not to drop or strike the wireless unit.

11. 

Avoid touching the terminal of the wireless 

unit with bare hands or metallic materials.

12. 

Always remove the battery on the product 

when installing the wireless unit into it.

13. 

When opening the lid of the slot, avoid the 

place where dust and water may come into the 

slot. Always keep the inlet of the slot clean.

14. 

Always insert the wireless unit in the correct direction.

15. 

Do not press the wireless activation button 

on the wireless unit too hard and/or press the 

button with an object with a sharp edge.

16. 

Always close the lid of the slot when operating.

17. 

Do not remove the wireless unit from the slot 

while the power is being supplied to the tool.

Doing so may cause a malfunction of the wireless unit.

18. 

Do not remove the sticker on the wireless unit.

19. 

Do not put any sticker on the wireless unit.

20. 

Do not leave the wireless unit in a place where static 

electricity or electrical noise could be generated.

21. 

Do not leave the wireless unit in a place subject 

to high heat, such as a car sitting in the sun.

22. 

Do not leave the wireless unit in a dusty or powdery 

place or in a place corrosive gas could be generated.

23. 

Sudden change of the temperature may bedew 

the wireless unit. Do not use the wireless unit 

until the dew is completely dried. 

24. 

When cleaning the wireless unit, gently wipe 

with a dry soft cloth. Do not use benzine, thin-

ner, conductive grease or the like.

25. 

When storing the wireless unit, keep it in the 

supplied case or a static-free container.

26. 

Do not insert any devices other than Makita 

wireless unit into the slot on the tool.

27. 

Do not use the tool with the lid of the slot damaged.

 Water, 

dust, and dirt come into the slot may cause malfunction.

28. 

Do not pull and/or twist the lid of the slot more than 

necessary.

 Restore the lid if it comes off from the tool.

29. 

Replace the lid of the slot if it is lost or damaged.

SAVE THESE INSTRUCTIONS.