Makita XCS06, Instruction Manual

13 ENGLISH

CAUTION:

Ensure that the Lock Button 

is completely pushed in. If not, the hexagonal 

wrench can rotate and may cause personal injury.

5.

  With the Tipped Saw locked, turn the hexagonal 

wrench counterclockwise to loosen and remove the bolt 

and washer.

6.

  Remove the Tipped Saw Guide and the Tipped 

Saw.

How to replace the Tipped Saw

CAUTION:

Use only Makita supplied Tipped 

Saw. If reusing a Tipped Saw, ensure it is not 

worn, chipped or damaged.

CAUTION:

Use only a Tipped Saw with three 

holes which fit the pins on the output shaft of the 

tool. Other type of saws cannot be used.

CAUTION:

Install a Tipped Saw in the correct 

direction. 

If incorrect, the three pins do not fit the 

hole properly.

CAUTION:

Clean and remove all debris and 

dirt from the Tipped Saw and parts. Debris and 

dirt can unbalance the Tipped Saw making it 

wobble during cutting.

Replace the Tipped Saw

► 

Fig.13:

1.

 Push (Lock Button)

1.

  Fit the Tipped Saw over the Output Shaft. Make 

sure that the three pins on the Output Shaft fit in the 

holes on the Tipped Saw.

2.

  Replace the Tipped Saw Guide.

3.

Replace the Bolt and Washer.

4.

Push in the Lock Button completely to prevent the 

Tipped Saw rotating and tighten the Bolt with the hex

-

agonal wrench.

CAUTION:

Ensure that the Lock Button 

is completely pushed in. If not, the hexagonal 

wrench can rotate and may cause personal injury.

5.

  Replace the Tipped Saw Cover.

6.

  Tighten the Tipped Saw Cover Retaining Bolts (4 

pieces) with a hexagonal wrench.

MAINTENANCE

CAUTION:

Always ensure that the tool is 

switched off and the battery is removed before 

attempting to perform inspection or maintenance.

NOTICE:

Never use gasoline, benzine, thinner, 

alcohol or the like. Discoloration, deformation or 

cracks may result.

► 

Fig.14:

1.

 Dust Cover

Remove the Dust Cover from the air vent and clean it 

for proper air circulation.

CAUTION:

 Clean the Dust Cover when it 

becomes clogged. Continuing operation with a 

clogged dust cover may damage the tool.

MAKITA LIMITED WARRANTY

Please refer to the annexed warranty sheet for the 

most current warranty terms applicable to this product.

If annexed warranty sheet is not available, refer to the 

warranty details set forth at below website for your 

respective country.

United States of America: www.makitatools.com

Canada: www.makita.ca

Other countries: www.makita.com