2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
XDT16
Fastening capacities
Machine screw
4 mm - 8 mm (5/32" - 5/16")
Standard bolt
5 mm - 16 mm (3/16" - 5/8")
High tensile bolt
5 mm - 14 mm (3/16" - 9/16")
No load speed (RPM)
Max impact mode
0 - 3,600 /min
Hard impact mode
0 - 3,200 /min
Medium impact mode
0 - 2,100 /min
Soft impact mode
0 - 1,100 /min
Wood mode
0 - 1,800 /min
Bolt mode
0 - 3,600 /min
T mode (1)
0 - 2,900 /min
T mode (2)
0 - 3,600 /min
Impacts per minute
Max impact mode
0 - 3,800 /min
Hard impact mode
0 - 3,600 /min
Medium impact mode
0 - 2,600 /min
Soft impact mode
0 - 1,100 /min
Wood mode
0 - 3,800 /min
Bolt mode
0 - 3,800 /min
T mode (1)
-
T mode (2)
0 - 2,600 /min
Rated voltage
D.C. 18 V
Overall length
116 mm (4-9/16″)
Net weight
1.2 - 1.5 kg (2.7 - 3.4 lbs)
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
