Makita XRU09, Repair Manual

P 3/ 19

(1) Remove Cutter blade / Tipped saw blade / Nylon cutting head / Plastic blade. (

Figs. 2-1-1, 2-1-2 and 2-1-3) 

2 ROTOR, STATOR ASS’Y

2-1 Disassembling

1. Hold Rotor by inserting Hex wrench into the side hole 

    of Motor housing. 

    Remove M10-17 Hex nut by turning it clockwise. 

2. Remove Cup, Clamp washer, Cutter blade

    and Receive washer A (48). 

M10-17 Hex nut

Fig. 2-1-1

Fig. 2-1-2

Hex wrench to hold Rotor

Motor housing

Receive washer A

Cutter blade/Tipped saw blade

Cutter blade/Tipped saw blade

Clamp washer

Cup

< Cutter blade/ Tipped saw blade>

1. Hold Rotor by inserting Hex wrench into the side hole of Motor housing. 

    Remove Nylon cutting head by turning it clockwise. 

2. Remove Guard and Receive washer.

Guard

Receive washer

Nylon cutting head

Hex wrench to hold Rotor

Motor housing

< Nylon cutting head>

Fig. 2-1-3

1. Hold Rotor by inserting Hex wrench into

    the side hole of Motor housing. 

    Remove Plastic blade by turning it clockwise. 

Plastic blade

Hex wrench

2. Remove Hex nut, Plastic blade and Receive washer.

Hex nut

Receive washer

< Plastic blade >

Plastic blade