background image

2 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model:

XRU13

No load speed 

(without cutting tool)

4,000/5,000/6,000 /min

Overall length 

(without cutting tool)

1,510 - 1,610 mm 

(59-1/2″ - 63-1/2″)

Nylon cord diameter

2.0 - 2.3 mm

 

(0.08″ - 0.09″)

Applicable cutting tool and 

cutting diameter

Nylon cutting head  

(P/N 198971-4 / 198972-2)

300 mm

 

(11-3/4″)

Rated voltage

D.C. 18 V

Net weight

3.0 - 3.4 kg

 

(6.6 - 7.4 lbs)

Due to our continuing program of research and development, the specifications herein are subject to change 

without notice.

Specifications may differ from country to country.

The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge

BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B

Charger

DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF

Some of the battery cartridges and chargers listed above may not be available depending on your region of 

residence.

WARNING:

 

Only use the battery cartridges and chargers listed above.

 Use of any other battery cartridges 

and chargers may cause injury and/or fire.

SAFETY WARNINGS

Important safety instructions

WARNING:

 

When using electric gardening 

appliances, basic safety precautions should 

always be followed to reduce the risk of fire, 

electric shock, and personal injury, including the 

following.

Read All Instructions

Failure to follow the warnings and instructions may 

result in electric shock, fire and/or serious injury.

SAVE THESE INSTRUCTIONS.

General instructions

1.

Never allow people unfamiliar with these instruc-

tions or children to use the machine. Local reg-

ulations can restrict the age of the operator.

 It is

dangerous in the hands of untrained users or children.

2.

Be sure that anyone who is to operate the 

string trimmer has first read the instruction 

manual.

3.

Use the string trimmer with the utmost care

and attention.

4.

Operate the string trimmer only if you are in 

good physical condition. Perform all work 

calmly and carefully. Use common sense 

and keep in mind that the operator or user is 

responsible for accidents or hazards occurring 

to other people or their property.

5.

Never operate the string trimmer when tired, 

feeling ill or under the influence of alcohol or

drugs.

6.

Avoid accidentally starting:

— 

Ensure the switch is in the off posi-

tion before installing the battery pack.

 

Inserting the battery pack into the string 

trimmer with the switch on invites accidents.

— 

Carrying the string trimmer with your 

finger on the switch invites accidents.

7.

The string trimmer should be switched off 

immediately if it shows any signs of abnormal 

operation.

8.

Disconnect the battery from the string trimmer

before making any adjustments, changing 

accessories or storing.

 Such preventive safety 

measures reduce the risk of starting the sting 

trimmer accidentally.

9.

Don't force the tool.

 It will do the job better and

with less likelihood of a risk of injury at the rate for 

which it was designed.

Summary of Contents for XRU13Z















Reviews: