background image

5 ENGLISH

6.

Use only the manufacturer's recommended 

replacement parts and accessories.

7.

Inspect and maintain the tool regularly, espe-

cially before/after use. Have the tool repaired 

only by our authorized service center.

8.

Keep handles dry, clean and free from oil and 

grease.

SAVE THESE INSTRUCTIONS.

WARNING:

 

DO NOT let comfort or familiarity 

with product (gained from repeated use) replace 

strict adherence to safety rules for the subject 

product. MISUSE or failure to follow the safety 

rules stated in this instruction manual may cause 

serious personal injury.

WARNING:

 

Use of this product can create 

dust containing chemicals which may cause 

respiratory or other illnesses. Some examples of 

these chemicals are compounds found in pesti-

cides, insecticides, fertilizers and herbicides.
Your risk from these exposures varies, depend-

ing on how often you do this type of work. To 

reduce your exposure to these chemicals: work 

in a well ventilated area, and work with approved 

safety equipment, such as those dust masks that 

are specially designed to filter out microscopic 

particles.

Symbols

The followings show the symbols used for tool.

volts

direct current

no load speed

revolutions or reciprocation per minute

Important safety instructions for 

battery cartridge

1.

Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery 

charger, (2) battery, and (3) product using 

battery.

2.

Do not disassemble battery cartridge.

3.

If operating time has become excessively 

shorter, stop operating immediately. It may 

result in a risk of overheating, possible burns

and even an explosion.

4.

If electrolyte gets into your eyes, rinse them

out with clear water and seek medical atten-

tion right away. It may result in loss of your 

eyesight.

5.

Do not short the battery cartridge:

(1)

Do not touch the terminals with any con-

ductive material.

(2)

Avoid storing battery cartridge in a con-

tainer with other metal objects such as 

nails, coins, etc.

(3)

Do not expose battery cartridge to water

or rain.

A battery short can cause a large current 

flow, overheating, possible burns and even a 

breakdown.

6.

Do not store the tool and battery cartridge in 

locations where the temperature may reach or

exceed 50 °C (122 °F).

7.

Do not incinerate the battery cartridge even if 

it is severely damaged or is completely worn 

out. The battery cartridge can explode in a fire.

8.

Be careful not to drop or strike battery.

9.

Do not use a damaged battery.

10.

The contained lithium-ion batteries are subject 

to the Dangerous Goods Legislation require-

ments. 

For commercial transports e.g. by third parties, 

forwarding agents, special requirement on pack

-

aging and labeling must be observed. 

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required. 

Please also observe possibly more detailed 

national regulations. 

Tape or mask off open contacts and pack up the 

battery in such a manner that it cannot move 

around in the packaging.

11.

Follow your local regulations relating to dis-

posal of battery.

12.

Use the batteries only with the products 

specified by Makita.

 Installing the batteries to

non-compliant products may result in a fire, exces

-

sive heat, explosion, or leak of electrolyte.

SAVE THESE INSTRUCTIONS.

CAUTION:

 

Only use genuine Makita batteries.

 

Use of non-genuine Makita batteries, or batteries that 

have been altered, may result in the battery bursting 

causing fires, personal injury and damage. It will 

also void the Makita warranty for the Makita tool and 

charger.

Tips for maintaining maximum 

battery life

1.

Charge the battery cartridge before completely

discharged. Always stop tool operation and 

charge the battery cartridge when you notice 

less tool power.

2.

Never recharge a fully charged battery car-

tridge. Overcharging shortens the battery 

service life.

3.

Charge the battery cartridge with room tem-

perature at 10 °C - 40 °C (50 °F - 104 °F). Let 

a hot battery cartridge cool down before 

charging it.

4.

Charge the battery cartridge if you do not use

it for a long period (more than six months). 

Summary of Contents for XRU13Z















Reviews: