Makita XRU15PT, Instruction Manual

11 ENGLISH

Electronic function

Constant speed control

The speed control function provides the constant rota

-

tion speed regardless of load conditions.

Soft start feature

Soft start because of suppressed starting shock.

ASSEMBLY

WARNING:

Always be sure that the tool is 

switched off and battery cartridge is removed 

before carrying out any work on the tool.

 Failure to 

switch off and remove the battery cartridge may result 

in serious personal injury from accidental start-up.

WARNING:

Never start the tool unless it is 

completely assembled.

 Operation of the tool in a 

partially assembled state may result in serious per-

sonal injury from accidental start-up.

Installing the handle

1.

Attach the upper and lower clamps on the damper.

2.

Put the handle on the upper clamp and fix it with

hex socket bolts as illustrated.

2

1

3

5

4

6

►  

1.

 Hex socket bolt 

2.

 Handle 

3.

 Upper clamp

4.

Damper 

5.

 Lower clamp 

6.

 Spacer

CAUTION:

Do not remove or shrink the 

spacer.

 Doing so lose the balance of the tool and 

may cause personal injury.

Hex wrench storage

CAUTION:

Be careful not to leave the hex 

wrench inserted in the tool head. 

It may cause 

injury and/or damage to the tool.

When not in use, store the hex wrench as illustrated to 

keep it from being lost.

1

►  

1.

 Hex wrench

For the loop handle model, the hex wrench can also be 

stored on the handle as illustrated.

1

►  

1.

 Hex wrench

Correct combination of the cutting 

tool and the protector

CAUTION:

Always use the correct combi-

nation of cutting tool and the protector.

 A wrong 

combination may not protect you from the cutting tool, 

flying debris, and stones. It can also affect the bal

-

ance of the tool and result in an injury.

Cutting tool

Protector

Nylon cutting head