2
ENGLISH (Original instructions)
SPECIFICATIONS
Model XPH01
XPH02
Concrete
13 mm (1/2")
13 mm (1/2")
Steel
13 mm (1/2")
13 mm (1/2")
Wood
38 mm (1-1/2")
38 mm (1-1/2")
Wood screw
10 mm x 89 mm (3/8" x 3-1/2")
6 mm x 75 mm (1/4" x 2-15/16")
Capacities
Machine screw
M6 (1/4")
M6 (1/4")
High (2)
0 - 1,500 /min
0 - 1,500 /min
No load speed (RPM)
Low (1)
0 - 400 /min
0 - 400 /min
High (2)
0 - 22,500 /min
0 - 22,500 /min
Blows per minute
Low (1)
0 - 6,000 /min
0 - 6,000 /min
Overall length
206 mm (8-1/8")
206 mm (8-1/8")
Net weight
1.6kg (3.4 lbs)
1.8kg (4.0 lbs)
1.7kg (3.8 lbs)
Rated voltage
D.C. 18 V
D.C. 14.4 V
Standard battery cartridge
BL1815 / BL1815N /
BL1820
BL1830 / BL1840 /
BL1850
BL1430 / BL1440
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
GEA006-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1.
Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control.
Electrical Safety
4.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
5.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of
electric shock if your body is earthed or grounded.
6.
Do not expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock.
7.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords
increase the risk of electric shock.
8.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply.
Use of an
GFCI reduces the risk of electric shock.
Personal Safety
10.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A
moment of inattention while operating power tools
may result in serious personal injury.
11.
Use personal protective equipment. Always
wear eye protection.
Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
Summary of Contents for XT704
