Quick Installation Guide For Petroleum Sites with Mako Performing MNSP Function v2.1.1
Installation Scenarios
Type 1: New Install, No Outside EMV
1)
LAN 1 (Card Net) should be cabled to slot A on the Commander or the Payment Network port on
the Commander 16/RubyCi.
2)
LAN2 (VFI POS) connects to the Mako-supplied switch. The Verifone POS and Verifone Zone port
(N on the Commander and Ethernet Symbol on Commander 16/RubyCi) will connect to the Mako-
supplied switch.
3)
LAN3 (Store) needs to be cabled to the customer back-office switch if available.
4)
LAN4 (Open) is free to be used by the location for any internet purpose they wish. You are not
required to cable LAN4 in this configuration type.
LAN 3
LAN 4
CUSTOMER
SWITCH
CUSTOMER
SWITCH
LAN 1
LAN 2
M A KO 6 0 0 0 -S E R I E S
VERIFONE
POS
VERIFONE
POS
NIC A
NIC N
VERIFONE
COMMANDER
PINPAD
PINPAD
B AC K O F F I C E P C
