MAKSIWA CBC.EC, Instruction Manual

11

SOLUTION GUIDE

PROBLEM

CAUSE

SOLUTION

Machine is not turn on

Plug disconnected or connected 

improperly.

Check the connection and the voltage 

of your power supply.

Main switch off.

Turn on the Main switch.

ON switch off.

Turn on the ON switch (green).

Emergency switch activated.

Rotate clockwise to release.

Circuit breaker off.

Check the voltage of your Power 

supply (110V) and turn on the breaker 

inside of panel.

The glue is not heating

Temperature Controller unregulated.

Adjust the temperature settings.

Burned resistance.

Contact the Maksiwa Service to change 

the resistance.

The tape is not gluing

The glue is not at the correct 

temperature.

Check the glue temperature 

specification.

Missing glue at the glue axis.

Complete the glue pot with more glue.

The glue is inadequate to this 

equipment.

Check the directions about glue brands 

in this manual.

The thickness of the glue is incorrect.

Adjust the thickness of the glue (check 

this manual).

The glue axis is out of bracket (square).

Adjust the bracket of the glue axis 

(check this manual).

The edge of the panel is out of square.

Check the square of your panelyou’re 

your panel saw.