13
3.5 Initial commissioning
Once assembly is complete, test run the machine to ensure it is properly connected to power and
safety components are functioning correctly.
If you find an unusual problem during the test run, immediately stop the machine, disconnect it from
power, and fix the problem BEFORE operating the machine again.
DO NOT start machine until all preceding setup instructions have been performed.
Operating an improperly set up machine may result in malfunction or unexpected results
that can lead to serious injury, death, or machine/property damage.
To test run machine:
1. Clear all setup tools away from machine.
2. Lock all swivel casters on base stand and dust collection drum.
3. Connect machine to the cyclone dust collector or place covers over inlet adapter ports.
DO NOT operate the machine without first connecting it to a dust-collection system
or covering an inlet adapter port. Otherwise, the lack of airflow resistance will
cause the motor to operate at full amperage load, which could trip your circuit
breaker or blow a fuse.
4. Connect machine to power.
5. Standing away from intake port, press button “ON” to turn machine on.
6. Verify motor starts up and runs smoothly without any problems or unusual noises.
7. Press “OFF” button to turn machine OFF.
3.6 Optional accessories for dust collector
4
Blast gate
Elbow
Adaptor
Connector
Connector
Canister filter
Flexible hose
Hose clamp
Bag clamp
Dust bag
2
Greetings,
Congratulations, you just purchased the BMS.3200.IR Precision Saw, which was developed with the
Maksiwa’s highest standards of technology and quality. Your BMS.3200.IR Precision Saw allows you
to have the highest productivity in woodworking. Besides a great finish, the BMS.3200.IR ensures that
your cuts are always precise. It should be noted that to use this machine with maximum efficiency,
you should read and understand the instructions in this manual.
Visit our website to know about our launches and other product lines:
www.maksiwa.com
